Warrior Swagger Goalie Catch Glove
  • Front - White/Gold/Black (Warrior Swagger Goalie Catch Glove)
  • Back Hand - White/Gold/Black (Warrior Swagger Goalie Catch Glove)
  • We are sorry, this item is not currently available. Please continue shopping.

Warrior Swagger Goalie Catch Glove [Junior]

2010 | 4380-21
  • bvseo_sdk, net_sdk,
  • getAggregateRating, method:CLOUD, 2730ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;


The Warrior Swagger catch glove is a Sr. Pro level glove with Elite-level protection.  The palm is beefy enough to minimize stingers, yet the dual break zones allow the glove to be opened and closed relatively easily.  The pocket features a double-pronged or split-T web construction which acts to reduce the spin of the puck upon impact and reduce pop outs.  A two-piece cuff and thumb protector provide for good wrist mobility.

The back on the glove opens completely for drying, and once inside you'll notice three backhand adjustment straps - one on the wrist, one on the back of the hand, and one on the back of the fingers.  A wrist pillow helps soften impacts to the cuff and also creates a tighter fit between the wrist strap and the glove palm for a snug fit. 

Additional features include:

  • Two-piece thumb and cuff box construction for optimum wrist mobility
  • Flared cuff box for puck deflection
  • Hinged break allows for maximum open surface
  • Dual break zones for controlled closure
  • Three-point internal strapping system includes easy-access wrist strap, comfort backhand, and finger stall strap
  • Mesh finger stall venting
  • Antimicrobial V-Tek liner wicks moisture
  • Two-pronged pocket construction increases surface and depth
  • High-density foam fingertip protection
  • Multi-flex backhand protection


Weight:1.80 lbsWeight of the product measured in pounds.
Number of Adjustable Straps:Wrist (1), Backhand (1), Fingers (1)Number and Location of Straps used for adjusting the overall fit.
Pocket Type:Double T, Nylon LacingDesign and shape of the pocket.
Break Angle:45 deg.The angle at which the catching glove closes. When holding your bare hand in a catching position, 45-50 degree break angles close directly between your forefinger and thumb, while a 90 degree break closes very near your thumb.
Cuff Design:Two-PieceTraditional Cuff has a seam between the padded cuff and the thumb area/catching surface, whereas a Solid Cuff has no break - the thumb area and the cuff are one large, continuous pad.
External Material:Synthetic LeatherType of external material.
Made In:CanadaCountry of origin.
Warranty:90 DaysPeriod of time the product is covered under a manufacturer's warranty.


Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.

Catch Glove Sizing Chart
4 3/4 - 5 5/8 in. 5 5/8 - 6 1/4 in. 6 1/4 - 7 in. 7 - 8 3/8 in.
119 - 143 cm 144 - 160 cm 161 - 178 cm 179 - 213 cm

Keys to a Proper Fit:

  • The goalie's fingers should extend out to the end of the finger stalls of the inside palm to ensure a proper fit. However, any more than 1/2" from the tip of the goaltender's finger to the end of the finger stall and the goaltender will not have the leverage needed to properly close and control the glove.
  • The heel of your hand should line up with the heel and cuff of the catcher. If not, the proper balance between the cuff and catching portion of the glove may be disturbed, making the glove too cumbersome while sacrificing protection. 



  • bvseo_sdk, net_sdk,
  • getReviews, method:CLOUD, 16ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;


  • bvseo_sdk, net_sdk,
  • getContent, method:CLOUD, 62ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;