Bauer Tuuk Lightspeed 2 Limited Edition Black Holder

Bauer Tuuk Lightspeed 2 Limited Edition Black Holder

2010 | 5130-2
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getAggregateRating, method:CLOUD, 1248ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Shipping limited to USA due to brand restrictions. More info.
  • Excludes any applicable taxes and shipping costs.

PRODUCT DESCRIPTION

Pure Hockey Says: Bauer TUUK holders are preferred by a large majority of NHL players, even though many do not use skates that come with TUUKs from the factory. The LS2 is made from a lightweight, abrasion and impact resistant plastic. The runner locks in using one screw in the back half and a ‘Sharktooth’ in the front half to reduce hardware weight. This holder is the top choice among Pros for a reason!

RATINGS & REVIEWS

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getReviews, method:CLOUD, 15ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

PRODUCT Q & A

Are these the same as the clear light speed 2 power just a different colour? Or are they different?

Asked by: katnyc
Yes, these are the same as the Lightspeed 2 holders. These are the Limited Edition Black Holder
Answered by: JasonG
Date published: 2017-09-23

so I was wondering would my local hockey shop be able to replace the holders easily can I do it at home like what would be best.

Asked by: hockey78
Our stores can definitely help you out, just head i and they will be happy to assist.
Answered by: Cory
Date published: 2017-05-24

What size will i need for a 5.5 ccm for the usa hockey skate.

Asked by: Augie
5.5 D width would be 246 mm and 5.5 EE would be a 254 mm.
Answered by: Marc G
Date published: 2017-05-24

would these fit on a supreme 3000 boot

I have a pair of Bauer supreme 3000 skates size 14E from the late 90's early 2000's that currently have the Comp ICM. Would i be able to replace the Comp ICM's with these new Lightspeed 2 blade holders and blades.
Asked by: Anonymous
The LightSpeed II holders will fit on the older supreme models. However, new holes might have to be drilled to facilitate the change. If you are able to go to one of our physical stores, they will be able to change the holders for you.
Answered by: ConnerC
Date published: 2017-05-24

Can these fit on Graf g65 boots

Asked by: Heipfam
They will not. The holes on the holders and boots will not line up properly.
Answered by: MikeM
Date published: 2017-05-24

what size would you think would fit in a reebok 9k 2009 mondol

Asked by: Anonymous
Look on the bottom of your holder on the heel. You will see a 3 digit number with an "L" or and "R". That is the holder and steel size you will need to ensure a proper fit. Sometimes additional holes need to be drilled to fit the Tuuk holder to a Reebok boot. This will not affect the integrity of the skate.
Answered by: Nathan
Date published: 2017-05-24

What size for 9.5 senior skate

What size holders should i get if i wear a size 9.5D skate
Asked by: Anonymous
280MM is the correct size holder if you are wearing a Bauer skate with the holder. Different brand skates may require another holder size.
Answered by: Mstein
Date published: 2017-05-24

what size would you recomend for the limited edition bauer supreme one.6 size 10.5

Asked by: Anonymous
A 10.5 D skate by Bauer will take a 288mm holder. 10.5EE would be 296mm
Answered by: Mstein
Date published: 2017-05-24
  • y_2017, m_10, d_17, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_5130_2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_purehockey
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getContent, method:CLOUD, 32ms
  • QUESTIONS, PRODUCT