The Supreme TotalONE blocker is a "Butterfly" style blocker designed for maximum coverage and protection. It features many of the same features as the popular Supreme One100 blocker with a few key performance and protection upgrades.
New for 2012, the TotalONE blocker features a new thinner profile blocker board made of EPP dual construction. The board thickness measures only 1.375 inches, but the new foam construction allows for the same great protection that you've come to expect from the Supreme line. The board is beveled on the front for better paddle down play, and also in the back (at the cuff) for increased wrist flexibility. Board position is centered over the backhand for great balance.
The side hand protection features a large HD foam shield that completely covers the hand, as well as extended forefinger protection that consists of one solid HD foam piece and one removeable HD foam finger extension. Thumb protection has been beefed up in the TotalONE blocker to include a larger thumb protection pad, and a seam has been added at the base of the thumb to provide for maximum thumb flexion. HD foam shields surround the fingers on the front and on the sides, with larger shields protecting the fingers.
The palm is made of a cream colored nash with mesh finger gussets for added flexibility and breatheability. The grip areas of the palm (forefinger down through the palm area) are reinforced with a soft digital nash for grip and Bauer's "AB-SORB" padding on the heel of the palm for added wear protection.
- Made in Canada
- Thinner profile blocker board provides for superior protection and reduced weight
- Mid or centered blocker board position
- Removeable index finger protection
- Maximum coverage side hand protection
- Soft digital nash palm reinforced with AB-SORB padding
Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.
Blocker Sizing Chart
|4 3/4 - 5 5/8 in.
||5 5/8 - 6 1/4 in.
||6 1/4 - 7 in.
||7 - 8 3/8 in.
|119 - 143 cm
||144 - 160 cm
||161 - 178 cm
||179 - 213 cm
Key to a Proper Fit:
The blocker should be fitted based on hand size. The goalie's fingers should be no more than 1/4" from the end of the fingers in the palm. If the fingers are too long, chances are the hand tabs that tie down the palm to the blocker are too large. This will cause the blocker to wobble, tilt or rotate on the goaltender's hand, seriously affecting control while limiting coverage (blocking surface).