Reebok Premier X28 Goalie Catch Glove - Single-T Pocket

Reebok Premier X28 Goalie Catch Glove - Single-T Pocket

2015 | 18428-31
[Intermediate]
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getAggregateRating, method:CLOUD, 78ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Shipping limited to United States mailing addresses due to manufacturer imposed international policy.
  • Excludes any applicable taxes and shipping costs.

HIGHLIGHTS

  • Single-T pocket
  • One-piece injected thumb molding
  • 590 design (60 degree)

AVERAGE RATINGS

0 Stars

FEATURES

Number of Adjustable Straps:Wrist (1), Backhand (1), Fingers (1)Number and Location of Straps used for adjusting the overall fit.
Pocket Type:Single-TDesign and shape of the pocket.
Break Angle:590 (60 Degree)The angle at which the catching glove closes. When holding your bare hand in a catching position, 45-50 degree break angles close directly between your forefinger and thumb, while a 90 degree break closes very near your thumb.
Cuff Design:One-piece cuffTraditional Cuff has a seam between the padded cuff and the thumb area/catching surface, whereas a Solid Cuff has no break - the thumb area and the cuff are one large, continuous pad.
External Material:MicrofiberType of external material.
Made In:ChinaCountry of origin.
Warranty:90 DaysPeriod of time the product is covered under a manufacturer's warranty.

PRODUCT DESCRIPTION

The Premier X28 glove features a one-piece, injection molded cuff and thumb that is designed to create a wide, deep glove pocket.  The stock model comes in the 590 design, which creates a traditional 60 degree closure (index finger to thumb closure).

The opening cuff in the glove is detatched, which allows for great wrist mobility.  The backhand features three tigthening straps - wrist, backhand and fingers - and a nylon webbing wrist strap has been run through the cuff so that you don't have to detatch the cuff to tighten the strap.

  • MAXCOVERAGE:  One-piece injection molded thumb cuff design maintains 3D shape
  • QUICKRELEASE:  Forward angle provides more wrist mobility
  • MOBILITY:  Large cuff opening for freedom of movement and wrist flexibility.
  • 590 design (60 degree break).   
  • Permiter Measurements:  Senior - 45", Intermediate - 44"

SIZE CHART

Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.

 
Catch Glove Sizing Chart
YOUTH JUNIOR INTERMEDIATE SENIOR
4 3/4 - 5 5/8 in. 5 5/8 - 6 1/4 in. 6 1/4 - 7 in. 7 - 8 3/8 in.
119 - 143 cm 144 - 160 cm 161 - 178 cm 179 - 213 cm

Keys to a Proper Fit:

  • The goalie's fingers should extend out to the end of the finger stalls of the inside palm to ensure a proper fit. However, any more than 1/2" from the tip of the goaltender's finger to the end of the finger stall and the goaltender will not have the leverage needed to properly close and control the glove.
     
  • The heel of your hand should line up with the heel and cuff of the catcher. If not, the proper balance between the cuff and catching portion of the glove may be disturbed, making the glove too cumbersome while sacrificing protection. 

 

RATINGS & REVIEWS

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getReviews, method:CLOUD, 31ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

PRODUCT Q & A

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getContent, method:CLOUD, 63ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;