Bauer Tuuk Lightspeed Edge Holder [Senior]


Bauer Tuuk Lightspeed Edge Holder [Senior]

2013 | 12169-41
  • bvseo_sdk, net_sdk,
  • getAggregateRating, method:CLOUD, 62ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Shipping limited to USA due to brand restrictions. More info.
  • Low price guarantee. MAP pricing imposed. More info.
The all-new Tuuk Lightspeed Edge holder has a patented trigger system, which allows you to pop out your runner effortlessly to change it. The Tuuk also provides you with an increase of 3 millimeters in height. This allows the skater to get lower, and perform a tighter, deeper turn!
  • bvseo_sdk, net_sdk,
  • getReviews, method:CLOUD, 16ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Hi, can i put these on my ccm tacks 6052 skates? Size 7,5

Asked by: naikou
Although the CCM Tacks 6052 skates aren't made to be used with Tuuk holders, our stores should be able to change the holders to make it work.
Answered by: Kyle N
Date published: 2017-11-13

I have an old and I mean old pair of Bauer Custom 1000's. The boot is in great shape as is the bottom plate. Can I replace the old holder with a new Tuuk LS holder?

Asked by: Doc19
You will need to re-rivet, but yes you can.
Answered by: Nick W
Date published: 2017-07-14

Considering purchasing Edge holders for a CCM Ultra Tack skate. Only seeing sizes listed in whole sizes. I have a 6.5 CCM skate. What size would I go with for a holder? Also then what size coresponding steel? Thanks

Asked by: Tony
You would use the size 6 holder unless your skates are EE width. If they are EE width, you would use the size 7 holder. You would want an LS2 or LS3 Edge Runner in size 6 (or 7 if EE).
Answered by: Nick W
Date published: 2017-06-01

I would like to know which of these holders and Blades (Bauer Tuuk Lightspeed Edge Holder or Bauer Tuuk Lightspeed 2 Edge Holder) will fit on a CCM U+12 (Size 9 (280))? Thanks

Asked by: CraigS
Neither Bauer holder is designed to fit the CCM U+ line. It is likely that new rivet holes would need to be drilled in order to make that transition.
Answered by: ConnerC
Date published: 2017-05-24

I may be looking to change out the runners on my CCM RBZs but I am not sure what size LS holder I would need to get, I wear an 11.5 D. 

Asked by: Geoff T
Your LS holder would need to be the same size as your SpeedBlade holder, as they usually match up just fine.
Answered by: ConnerC
Date published: 2017-05-24

Do I have have to buy right and left one separately? Or you guys sell combo one for this? If I do have to then I'll put right one and left one in my cart and I'll get runner as well. My skate says 7EE. Does it mean that I should get size 7 runner& holder?

Asked by: Jun09
Each side is sold separately and a size 7.0EE would require the size 7.0 holder.
Answered by: ConnerC
Date published: 2017-05-24

I need new skate holders for my sons skates, he wears a size 7.5 skate and your holders only come in full sizes.  what size should I get for his 7.5 skate? a 7 or an 8?  Or do I need to try and find a 7.5 size?

Asked by: KRO13
Assuming D width you would want to get a size 7.0 (also referred to as 263mm) holder.
Answered by: MattS
Date published: 2017-05-24

I have CCM boots that use 295 holders and I want to switch to the Bauer holders with the quick release, which size is that? I want to say Bauer uses 296 holders so which skate size would be about that sized holder?

Asked by: TP13
A Bauer 296 would work for you.
Answered by: JeffC
Date published: 2017-05-24
  • y_2017, m_11, d_17, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_12169_41, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_purehockey
  • bvseo_sdk, net_sdk,
  • getContent, method:CLOUD, 109ms