Bauer Tuuk Lightspeed Edge Holder - Senior

5 Stars5

Bauer Tuuk Lightspeed Edge Holder - Senior

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getAggregateRating, method:CLOUD, 62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Join Pure Rewards to earn 40 Points
2013 | 12169-41
  • Shipping limited to USA. More.
  • Excluded from discounts, sales & promotions.

The all-new Tuuk Lightspeed Edge holder has a patented trigger system, which allows you to pop out your runner effortlessly to change it. The Tuuk also provides you with an increase of 3 millimeters in height. This allows the skater to get lower, and perform a tighter, deeper turn!

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getReviews, method:CLOUD, 16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Does it come in a pair or are they separate? Would these work in Easton mako 2 skates and what size would I need im a size 5.5

Asked by: Jofryer
the BAUER TUUK LIGHTSPEED EDGE HOLDER - JUNIOR are sold as a separate unit at $ 34.99 each . These holders will not fit flush and line up correctly to the Easton Mako 2 skate boots
Answered by: fred11
Date published: 2019-12-12

I own a pair of LS5 carbon steel and want to use em with my fresh pro stock XXXX, so my question is - if enge holder fits?

Asked by: Georgexciii
The LS5 will only fit into the Bauer Tuuk Lightspeed Edge holder, so if this is on your skates, then the steel will fit.
Answered by: MattM
Date published: 2019-10-17

will these work on ccm jetspeed skates

Asked by: njdevils51
Those holders will work on any skates including the CCM Jetspeed skates.
Answered by: Nic F
Date published: 2019-05-09

Would these holders fit a 7.5 Ribcor 64k Boot 

Asked by: Hockeguys
Yes if you are replacing both holders those would fit onto those skates.
Answered by: Andrewf
Date published: 2019-04-09

Hi  I wear a size 9.5 Bauer 1x. What size holder do I need to order. 

Asked by: Ryan03
If your skates are a 9.5D then you should be looking for a size 9 holder. Sometimes with half sizes and the E width you can see the next size up holder being used. Double check on the bottom of the holder to be sure. Thanks!
Answered by: Tyler R
Date published: 2019-04-08

May be a stupid question but I just bought the Bauer s150s and was wondering if these holders are an upgrade on the ones that are stock to the 150s? What are the benefits and will these fit my 150s? Thanks

Asked by: JamesofMN
These holders would be an upgrade to the holders found on the S150 skates. You will have more options when it comes to aftermarket steel and that would greatly benefit performance depending on the steel you choose. It could be a little expensive so we may suggest buying a pair of skates that come with these holders and steel already. The steel on your S150 skates wouldn't work with these holders. Thanks!
Answered by: Tyler R
Date published: 2019-03-06

What size in mm does a 8 and a 9 equate to? My current runner has 272 mm on it.  Thanks 

Asked by: Habs1
Size 8 is 272 and size 9 is 280.
Answered by: MattM
Date published: 2018-12-16

Is this only 1 Tuuk or a pair? I want to order for my skates but don't want to buy 2 if they come in a pair 

Asked by: COSmic_XRayZ
hello . the BAUER TUUK LIGHTSPEED EDGE HOLDER [SENIOR] is sold separately for $ 39.99 each . You would need to purchase both the left and right holders separate .
Answered by: fred
Date published: 2018-02-23
  • y_2019, m_12, d_13, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_12169_41, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_purehockey
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getContent, method:CLOUD, 47ms
  • QUESTIONS, PRODUCT