Bauer S19 Hi-Lo Inline Axle and Spacer Kit

 Stars

Bauer S19 Hi-Lo Inline Axle and Spacer Kit

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getAggregateRating, method:CLOUD, 46ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
$19.9900
Join Pure Rewards to earn 19 Points
2019 | 36693-2
  • Shipping limited to USA. More.
  • Excluded from discounts, sales & promotions.

S19 Hi-Lo Inline Axle and Spacer Kit

  • 8 Standard Axle and Spacers included
  • Square Post axle on one side, hex bolt on the other
  • Compatible with all 2018 and newer Bauer and Mission Inline Hockey Skates

100% Satisfaction Guarantee

We stand behind everything we sell

low price guarantee

We'll price match from any competitor!

Unlimited Returns

Return any unused item anytime

  • bvseo_sdk, net_sdk, 2.2.0.2
  • getReviews, method:CLOUD, 16ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

I have the old school bauer off ice h2 can I use this on then if I get the wheels as well

Asked by: Michael Magana
You may want to find hardware specific to that skate/frame because this kit will not work unfortunately. I haven't seen a hardware kit that would work on those skates for a little while. I hope you can find exactly what you need. You may find replacing them with a newer skate easier and if you need help with that we can help!
Answered by: Tyler R
Date published: 2021-01-28

What are the measurements for these?  I need a 8mm in diameter and 30 mm in length without the screw in the end or 34 mm when screwed in together. 

Asked by: Nickg
I'm sorry but these will not fit your requirements. These are 6mm axles. Thanks!
Answered by: Tyler R
Date published: 2021-01-09

I have old Bauer youth vapor x50r with the hi-lo youth large chassis and am fitting them with new Labeda 59+68" wheels and ABEC 7, are these the screws for this setup? Thanks

Asked by: Hockey in Florida
This hardware will work for that skate setup. Thanks!
Answered by: Tyler R
Date published: 2021-01-04

The picture for the BAUER S19 HI-LO INLINE AXLE AND SPACER KIT these do not show what the ends look like, so can you tell me are both ends round and do the ends of the allen key hole?

Asked by: S Burke
The round side will have the allen key hole and the square side will be flat. You screw the round "male" side into the square "female" side. Thanks!
Answered by: Tyler R
Date published: 2020-06-03

BAUER S19 HI-LO INLINE AXLE AND SPACER KIT and looking to purchase Labeda 85A outdoor wheels at 80 and 72mm. However, I do have a pair of Alkali CA4. looks like they've been discontinued. I do know they are ABEC9 bearing 608. Will this kit work?

Asked by: Anonymous
These bearings are the ones you would want for your skates. They will fit perfectly and be a very smooth roll. Thank you!
Answered by: Tyler R
Date published: 2020-06-01

do they fit marsblade?

Asked by: lylec305
We would suggest going for the Marsblade axles. https://marsblade.com/products/wheel-axles/ Thanks!
Answered by: Tyler R
Date published: 2020-12-01
  • y_2021, m_3, d_6, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_36693_2, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_purehockey
  • bvseo_sdk, net_sdk, 2.2.0.2
  • getContent, method:CLOUD, 78ms
  • QUESTIONS, PRODUCT